FLUENTPOWER 3/4 HP Submersible Utility Pump, 3500 GPH, Manual Control, 26.4 ft Cord, for Pool and Basement Draining

The FLUENTPOWER FSP7501C-1 submersible utility pump helps remove water from swimming pools, tanks, garden ponds and flooded basements. Its 3/4 HP motor delivers up to 3,500 GPH with a 1-1/2-inch discharge hose in a horizontal setup. Maximum lifting height is 30 ft; maximum flow and maximum lift are separate ratings, and output varies with hose diameter, hose length and elevation. This manually operated pump starts when plugged in and stops when unplugged. It requires approximately 4 inches of water to start and can drain down to approximately 2/5 inch. Monitor the water level and disconnect power before the pump runs dry, as it has no automatic water-level shutoff. A carrying handle, 26.4 ft power cord and included 26 ft rope make positioning easier. Supplied adapters and a check valve support compatible hose connections. Thermoplastic construction and thermal overload protection support household drainage. Match connector sizes and thread standards, and follow the operating instructions. MANUAL CONTROL AND WATER LEVELS: Plug in to run and unplug to stop. Starts at approximately 4 inch of water and drains down to approximately 2/5 inch. No automatic water-level shutoff; monitor the water and disconnect power before the pump runs dry. FLOW DEPENDS ON SETUP: The 3/4 HP motor delivers up to 3500 GPH using a 1-1/2 in discharge hose in a horizontal setup, with a maximum head of 30 ft. Maximum flow and maximum head are not achieved together; lift, hose size and length affect output

Specifications

• Gallons per minute: 60 GPM
• Horsepower: 0.75 HP
• Plumbing pump type: Sump Pumps
• Fuel type: Electric
• Power type: Corded Electric
• Brand: FLUENTPOWER
• Volts: 110 V
• Weight: 9.68 lb
• Has nrtl listing certification: N
• Accessories: GHT 3/4", NPT 1" and 1.5" male thread
• Amps: 3.5 Amps
• Watts: 540 W